Stainless Steel 304 Round Bars

ASTM A276 Stainless Steel 304 Bright Bar, SS DIN 1.4301 Hex Bars, 304 Steel Cold Finished Bars Suppliers in India. SS UNS S30400 Round Bars, JIS SUS 304 Flat Bar Exporter, SS 304 Square Bar, 304 SS Bar Leading Manufacturers.

A.B. Stainless Steel is one of the largest exporter, manufacturer and supplier of Stainless Steel 304 Round Bars in India. Our SS 304 Bars (also referred as WNR 1.4301) are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes. Also known as UNS S30400 Bars, these 304 Stainless Steel bars has an expansion coefficient nearly equal to that of modern concrete. If this were not so, it would cause problems through additional longitudinal and perpendicular stresses at temperatures different from the temperature of the setting.

Although these 304 SS Bars has ribs that bind it mechanically to the concrete, it can still be pulled out of the concrete under high stresses, an occurrence that often accompanies a larger-scale collapse of the structure. To prevent such a failure, these bars are either deeply embedded into adjacent structural members, or bent and hooked at the ends to lock it around the concrete and other bars.

AISI 304 Stainless Steel Round Bars Specification

Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI

Standard Specification : ASTM A276, ASTM A479, ASTM A182

SS 304 Round Bars : Outside Diameter in the range of 4mm to 500mm

SS 304 Bright Bars : Outside Diameter in the range of 4mm to 200mm

SS 304 Hex Bars : 4mm – 101.6mm

SS 304 Square Bars : 3mm – 100mm

SS 304 Flat Bars : 1 / 2” to 10” in thickness range of 1.6mm to 150mm, Custom Size Stainless Steel Flats available

Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Length : 1 to 6 Meters, Custom Cut Lengths

Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Our SS 304 Round bars conforms to NACE MR0175/ISO 15156

ASTM A276 Stainless Steel 304 Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 304	1.4301	S30400	SUS 304	304S31	08Х18Н10	Z7CN18‐09	X5CrNi18-10

304 Stainless Steel Round, Bright, Hex, Threaded Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 304	0.08 max	2 max	0.75 max	0.040 max	0.030 max	18 – 20	-	8 – 11	-

304 Stainless Steel Round Bars Mechanical & Physical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

Types Of Available Products AISI, ASTM, DIN, JIS, GB, EN SS 304 Round Bars 304 SS Threaded Bars Stockiest in India Stainless Steel 304 Cold Drawn & Polished Square Bars Austenitic ASTM Bright 304 Stainless Steel Bar SS WERKSTOFF NR. 1.4301 Round Bars 304 Stainless Steel Hexagon Bars Dealers Stainless Steel 304 Cold Drawn Bars Stockholder High Speed Steel Stainless Steel 304 Hollow Bar Suppliers ASME, ASTM, EN, BS, GB, Stainless Steel 304 Flat Bars AISI ASTM Stainless Steel 304 Round Bar Cold Rolled Stainless Steel 304 Rods